Acrylic Mahjong Racks & Pushers

A mahjong rack is the L-shaped or straight tile holder that sits in front of each player and houses their 13 active tiles plus drawn tiles. A mahjong pusher is the angled arm used to push tiles across the table — distinctly an American mahjong accessory (Chinese mahjong typically doesn't use them). Most modern US sets ship them as a combo product, with the pusher integrated into the rack's outboard edge. The industry-standard stack length is 18 inches; pastel multi-color sets of 4 (pink, blue, yellow, green) are the dominant retail SKU.

Our production MOQ is 100 sets of four per design. One set contains the four rack-and-pusher pieces needed for one mahjong table. A paid sample is available before production so you can approve color, grip, interlock, branding, and fit. Unit economics improve further at 200–500 sets per design.

Industry-standard 18-inch stack length — the reference length every major US-market American mahjong rack-and-pusher is built to. Rack width 1.7 inches, pusher arm length 2.8 inches angled at ~30°. Cast PMMA 5 mm wall thickness as default. The pusher integrates with the rack via a brass pin or stainless steel screw — we recommend brass pin for premium tier (matches the warm tone of cream-translucent rack PMMA). Custom geometry available — 16-inch travel-edition or 20-inch oversize for member-club tables, ± 0.5 mm custom axes on request.

Pastel multi-color set of 4 (Pantone-matched pink, blue, yellow, green) is the dominant US retail SKU. Clear premium cast PMMA is the second-most-requested finish — popular with private clubs and corporate gifting tier. Single-color brand-edition runs in any Pantone (12-colorway boutique-edition runs with mill-cert + spectrophotometer ΔE ≤ 2 protocol available). Frosted, etched, and UV-printed monogram finishes available on all four colorways. Holographic foil overlay available on premium-tier accents.

Premium 4-piece acrylic rack-and-pusher sets retail in the US at roughly $55–75 across the established designer-brand tier. Wetop's OEM reference lands at $12.70–14.30 per 4-piece set — 5mm standard at the lower end, 6mm heavy-gauge at the top. That 4×–5× retail-to-OEM spread is the typical mahjong-accessory margin profile — same shape as the tile-set retail/wholesale relationship. Our wedge is the 100-set MOQ floor for brand-newcomer programs that can't commit to 500+ pieces upfront.

Yes — and this is most of our volume in this category. UV-printed brand artwork on the rack body (any color, full-color register), laser-engraved monogram on the rack body or pusher arm (clean frosted-white mark on the acrylic), or hot-stamp foil for metallic logos. Custom Joker artwork on the inner-facing rack ledge is the premium-tier customization. Print area covers roughly 8 × 1.5 inches on the rack body.

Sample turn 5 days for stock-geometry custom-color pieces; 7-10 days for custom geometry. Production 12-18 days for a 200-set (800-piece) run. Sea freight Shenzhen to US west coast 14-18 days; air freight 3 days. Total order-to-warehouse for a typical US buyer 4-6 weeks. The cycle is slightly faster than tile-set production because rack-and-pusher has less customization surface area than tile bodies.

Yes. Standalone racks (without pusher arm) for clubs that already own pushers — popular as replacement orders. Standalone pushers (without rack body) for sets that ship with traditional racks but need pusher arms added — popular with hospitality OEM. Both standalone configurations ship at MOQ 100 sets of 4 same as combo product. Most US buyers source the combo since it eliminates fit-tolerance issues between rack and pusher from different vendors.

Three options. Brass pin (default, premium tier — warm tonal match with cream-translucent cast PMMA, doesn't oxidize). Stainless steel screw (budget tier — works but reads less premium). Magnetic interlock (zero-hardware option — pusher snaps to rack with embedded N52 magnets, fastest assembly but limited to specific orientation). For multi-color sets where each rack-pusher pair is in a different Pantone color, brass-pin assembly is the cleanest visual default.

12-month component-replacement guarantee against optical defect, color drift, or pin/screw hardware failure from approved sample. Pusher arm tip is the highest-wear zone — we use a slightly thicker 6 mm cast PMMA at the contact-edge corners to mitigate. 7-day buyer-side inspection window on landed shipment. Free replacement of any piece that fails optical or dimensional spec within the warranty window; replacement units ship by air at our cost if the buyer's downstream timeline is on the line.